Boostrapping from the bios22 Aug 2009
The BIOS is the first code running on a computer at start-up, it performs several operations on hardware such as initializations or tests, before the loading of the operating system. In this article we will see how the commutation between BIOS and the operating system occurs.
Once the BIOS has finished its operations, it looks for a list of devices to boot on : hard drive, floppy, CD-ROM, … This list depends on your BIOS’ configuration, and can be changed.
Is the device bootable?
On each of these devices, the bios will try to load the first 512 bytes from the device if the media is ready to be read. Then the BIOS will look at the offset 510 (decimal), to see if the magic number 00AA55 (16 bits) is present, if so, the media is considered to be bootable.
Here is an assembly implementation that prints a cup of coffee at startup:
;; A bootstrapper that prints a cup of coffee org 0 jmp 07C0h:start logo: db 10,13,10, " ~" ,13,10, " _----_" ,13,10, " |-____-|" ,13,10, " | |" ,13,10, " | |" ,13,10, " \______/" ,10,13,10, " Niiahhh coffee." ,13,10,0 start: push cs pop ds mov ecx, logo loop: mov ah, 0x0e ; print a char mov al, BYTE [ecx] ; the char int 10h inc ecx cmp BYTE [ecx], 0 jne loop hang: cli hlt jmp hang ; Infinite loop ;; Filling up to 510 bytes with 0 times 510-($-$$) db 0 ;; The magic number dw 0AA55h
As performing real stuff in 512 bytes is a hard work, most operating systems use this sequence to load another bootstrapper.
We just need to create an image and put it on a device, here a floppy.
$ nasm bootstrap.s -o bootstrap.bin $ dd if=bootstrap.bin of=path_to_floppy 1+0 records in 1+0 records out 512 bytes (512 B) copied, 6.6279e-05 s, 7.7 MB/s
Now you can reboot with the floppy and the BIOS configured to use the floppy device first.
More about this can be found by reading OpenBSD’s bootstrap.